您好,欢迎来到昆山盈轩电子科技有限公司官方网站!

联系我们

昆山盈轩电子科技有限公司
电 话:0512-57350498
    18136735350
传 真:0512-57350478
邮 箱:sales@ksyet.com
网 站:www.ksyet.com
地 址:昆山市玉山镇新南中路567号1号楼A栋1918-1919室

ISN T8

ISN-T8 Telecom Lines
Its design is based on the circuit illustrated in Figure D.3 of CISPR 22 and Figure F8 of CISPR 32.
The RF Port is a 50 Ohm female BNC connector, located on the top of the ISN. The ISN is equipped with two D-sub 25 pin female connectors located on the front panel (EUT Port) and rear panel (AE Port), providing the interface to the LCL Adapter and Connecting Adapter, respectively.

Standards: CISPR 16-1-2, CISPR 22, CISPR 32
Frequency Range: 150 kHz to 30 MHz
Application: Unscreened lines w/up to 4 balanced pairs
Max. Current rating:   800 mA (per line), 1.6 Amps (per pair)
Voltage rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
RF Port Connector: 50O BNC (female)
EUT/AE Port Connections:  RJ45 (RJ11 also available)
Common mode Impedance: 150O ą20 Ohms
Phase 0° ą20°
Voltage Division Factor:  10.5 dB ą1 dB
Decoupling Attenuation(minimum Isolation) 150 kHz to 1.5 MHz: 35 to 55 dB
1.5 MHz to 30 MHz: 55 dB
Symmetric Insertion Loss: Max: 3 dB ą0.25 dB
Symmetric Load Impedance:  100O
Transmission Bandwidth: >100 MHz
Weight:  1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]